FS Vitesse V-MAF+ $800

[944m3]

Practically new. Complete kit as received from Vitesse Racing. Also includes plug between MAF and existing AFM harness plug. This avoids having to cut and splice existing harness. I seem to have lost the “cap” at one end of the connector. Will keep looking for it but that can easily be replaced and it still works as is.

Installed on my car and ran for about 20 total miles. Unfortunately, I might have bad wiring harness or DME. The car would not run properly after warming up. I did troubleshoot with John, he was great providing support.

While removing the chip during troubleshooting, I snapped one of the pins. I sent it back to John to repair. Once I received the chip back, I decided to sell the kit. Meaning the chip is practically brand new as I have not installed it after receiving it back from John. (For clarity, the chip was repaired by John and it’s good as new. It’s ready to use).

I decided to sell and try my hand with a standalone rather than troubleshooting my old gear.

Again, to be clear, there is no issue with MAF system. I have an old crusty harness and a DME that I purchased used. I rather not continue trying to get that to work with the MAF.

EDIT: Decided to keep injectors. New price without injectors $800

Selling for $800 but happy to field offers.

[944m3]

Bump

Lowered asking price to $1600

[944m3]

Bump

$800 without injectors

[Black944 turbo]

What is this setup for ie, injector size, turbo, fpr, etcccc??

[944m3]

Setup for 80lbs high impedance injectors. 3 bar fpr. The chip is tuned to the injectors and not a specific turbo. That’s my limited understanding anyways. Plenty of information about this MAF out there.

[Black944 turbo]

Ok, thank you. Let me look over injector options and verify a few things.

[Tom]

In my experience with the Vitesse MAF and Chipboard, it performs well across a wide variety of turbos (and boost levels). I ran mine from 12 to 24psi, and with at least 3 or 4 turbos.

[944m3]

Ok, thank you. Let me look over injector options and verify a few things.

I believe John will sell you the supported injectors directly. Might want to email him if you’re really interested.

[Black944 turbo]

One more question, is there a map sensor and map harness? Don’t the newer kits all have a map sensor with the maf?

[944m3]

Yes. I would include the MAP sensor and harness. It is actually brand new as I already had a MAP sensor wired for Rogue’s A-tune. I mistakenly left it out of the picture. Including picture in this response.

Feel free to PM. Happy to answer any questions.