Page 1 of 1
Boxster washer fluid leak
Posted: Sun Apr 30, 2023 4:23 am
by fasteddie9
My 2013 Boxster leaks out the washer fluid. From the top everything looks OK. I haven't had the car on a lift yet. Is it hard to access this from below? Any tips are appreciated. Thanks in advance.
Re: Boxster washer fluid leak
Posted: Sun Apr 30, 2023 6:57 am
by JamesBond
- IMG_5617.jpeg (816.55 KiB) Viewed 643 times
it is behind the fender cover on the drivers side . remove wheel, remove the panel and then you will see the tank, most likely you will have a leak at the grommet where the washer motor inserts or a line that is cracked . Pretty easy to see everything. There are a lot of attachments - basically will need a 20 and 25 torx bit driver and a 10mm socket There is one hidden attachment at the top of the tank , then you basically pull it forward and it pops out of its attachments ( rubber grommets )in the back. Replacement back it made easier if you lube the rubber gromets
Re: Boxster washer fluid leak
Posted: Sun Apr 30, 2023 7:02 am
by fasteddie9
This looks pretty straight forward and the pic will be very helpful. Thank you so much