Page 2 of 3
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 2:56 pm
by gruhsy
First round of pics of my 40000km car.
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 2:56 pm
by gruhsy
More pics
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:02 pm
by gruhsy
Rage car throttlebody
Note the 90 degree fitting was not shown on first throttlebody.
Orings are new. 2 on one side. Single on other.
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:04 pm
by gruhsy
Oring store same size as Arnworx
Edit these are 8mm not 7mm
Pic was wrong bag.
They are 8mm x 2mm
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:07 pm
by gruhsy
Arnworx kit
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:15 pm
by Spencan
This is exactly what I was looking for, thanks!
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:18 pm
by gruhsy
Last cleaned throttle body from my 86 red car.
I will be plating all steel parts that require zinc chromate.
All three housings are spotless inside and out. The bearings don’t really wear out. Unless you see obvious damage pack them lightly with O-ring lube/grease like Braycote. We seal O-rings at work with this.
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:19 pm
by gruhsy
When I get back from my Motorcycle trip I can film taking apart Soloracer’s throttle body.
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:23 pm
by Spencan
Just out of curiosity, how much do you charge for this service?
Re: Throttle Body Options
Posted: Tue Jul 11, 2023 3:25 pm
by gruhsy
And these two photos are for me when I am Hulk smashing the house trying to find the Arnworx and O-ring store kit.