Carpokes Porsche Forum

Carmagic wrote: Wed May 24, 2023 9:55 am I did look into the trim rings for the 944 dash.

I sell them for 911 and 914. Take a look here http://carmagic.us/911_dialring.html
They are made of Aluminum, and just click in, no glue or tape needed.

I tried a test set for my 944 I had at that time, but they were to closed together for my taste, so I decided not to add them to my parts I offer.

Here is a picture of them installed in a 944 dash.


Cheers
Engelbert

Engelbert - we can work with that! I see what you mean and they look a little plain as is.

I have some ideas to enhance the look of them. Can you bevel the face of the rings so they have a slight “funnel” shape. See the silver trim of the gauge below - ignore the black other ring, which would not fit for the 944 / 968 gauges.

Also, what about adding hash marks and orange tabs on the rings, like so:

There's not enough room to bevel the face much without eating into the face of the gauge and/or bumping into each other on the outer diameter. The profile in that picture is very similar to the 992 bezel covers I make. I'll play around with some designs -- I have a few ideas to get that look despite the space constraints....

And, p.s., I agree the Carmagic rings look good. I'd offer those for sure...

Tom wrote: Wed May 24, 2023 12:14 pm There's not enough room to bevel the face much without eating into the face of the gauge and/or bumping into each other on the outer diameter. The profile in that picture is very similar to the 992 bezel covers I make. I'll play around with some designs -- I have a few ideas to get that look despite the space constraints....

And, p.s., I agree the Carmagic rings look good. I'd offer those for sure...

True Tom - I was referencing the thin silver ring of the gauge I posted above, not the black outer shroud. That silver ring has a very slight bevel. I added that clarification to my post above.

Can you print some for the 997 Platform?

Playing with ideas and came up with a retro-911 look.... Still work in process and I'm planning to join the two big rings. Have a few other ideas to try out, but like the old look myself. Funny thing is, when I do these in white or a bright color, it completely changes the look and feel...

Tom wrote: Tue Jun 13, 2023 6:04 pm Playing with ideas and came up with a retro-911 look.... Still work in process and I'm planning to join the two big rings. Have a few other ideas to try out, but like the old look myself. Funny thing is, when I do these in white or a bright color, it completely changes the look and feel...



944-bezel1.gif



944-bezel2.gif

Tom:

These rings look great! I love the height of them and the hash marks and redline extending onto the rings. I found out you can buy metal hour markers that can be placed onto a watch face. That might be a way to spice up these rings.

Could we try spraying the inner side of the rings with a nickel-colored paint to see how they turn out?

Fantastic start - I’m excited by this.

These are samples of hour markers.

Tom wrote: Tue Jun 13, 2023 6:04 pm Playing with ideas and came up with a retro-911 look.... Still work in process and I'm planning to join the two big rings. Have a few other ideas to try out, but like the old look myself. Funny thing is, when I do these in white or a bright color, it completely changes the look and feel...



944-bezel1.gif



944-bezel2.gif

Would some beer money get you to send me a set to try out in my S2? Lol
I need to pull the cluster again and refinish the black bezel.

stitch2k1 wrote: Thu Jun 15, 2023 4:39 pm

Tom wrote: Tue Jun 13, 2023 6:04 pm Playing with ideas and came up with a retro-911 look.... Still work in process and I'm planning to join the two big rings. Have a few other ideas to try out, but like the old look myself. Funny thing is, when I do these in white or a bright color, it completely changes the look and feel...



944-bezel1.gif



944-bezel2.gif

Would some beer money get you to send me a set to try out in my S2? Lol
I need to pull the cluster again and refinish the black bezel.

Yes , but hang on to your money for a bit. I'll be releasing a different version soon, which may really be 'a thing' if I get them right.

Can’t wait!