WTB: Aluminum Under Tray

Talk and Tech about turbocharged 924/944/968 cars
Post Reply
User avatar
Spencan
Posts: 147
Joined: Tue Jan 25, 2022 11:05 am
Location: Gilroy, Ca
Has thanked: 129 times
Been thanked: 31 times
my car is missing it and I would like to have it. I already checked with Lart and 944 Barn but no luck. Anyone have one lying around?
'89 Turbo S-Glacier Metallic Mods: Evergreen Turbo-"Raptor" stage II, Bell custom intercooler, FTech 9 DME & OBD+, Tial 38 Wastegate, GFB EBC, A-Tune, 3" Turbo Back Exhaust, Cross-Drilled rotors, refreshed suspension

#1

Top
User avatar
gruhsy
Posts: 517
Joined: Mon Jul 05, 2021 10:02 am
Has thanked: 48 times
Been thanked: 81 times
New from Porsche Classic parts

95150406900
Add Pictures/Files
E27454A3-A2EC-4AFE-B01C-DEE6E169B74D.jpeg
E27454A3-A2EC-4AFE-B01C-DEE6E169B74D.jpeg (3.67 MiB) Viewed 770 times

#2

Top
User avatar
johnb
Posts: 320
Joined: Thu Jul 08, 2021 5:57 am
Has thanked: 110 times
Been thanked: 78 times
Check the studs on the frame rails. I haven't been able to reinstall mine because the threads on the studs are shot. I don't think the rails are thick enough to tap for a new stud, so I think it has to be welded on if you need a new one.

#3

Top
User avatar
Spencan
Posts: 147
Joined: Tue Jan 25, 2022 11:05 am
Location: Gilroy, Ca
Has thanked: 129 times
Been thanked: 31 times
Thanks for the part# too. I found one on Ebay.
'89 Turbo S-Glacier Metallic Mods: Evergreen Turbo-"Raptor" stage II, Bell custom intercooler, FTech 9 DME & OBD+, Tial 38 Wastegate, GFB EBC, A-Tune, 3" Turbo Back Exhaust, Cross-Drilled rotors, refreshed suspension

#4

Top
User avatar
Tom
Site Admin
Posts: 8958
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 936 times
Been thanked: 4022 times
Contact:
Contact Tom
johnb wrote: Mon May 16, 2022 12:55 pm Check the studs on the frame rails. I haven't been able to reinstall mine because the threads on the studs are shot. I don't think the rails are thick enough to tap for a new stud, so I think it has to be welded on if you need a new one.
I used a die on mine to cut M5 threads. It went from undersized to even more undersized, but it does hold. If I ever weld a stud on there, it's doing to be at least M8....

edit: or maybe a rivnut in the wall...

#5

Top
User avatar
Doyle623
Posts: 50
Joined: Sat May 21, 2022 5:24 am
Location: Fairmont, WV
Has thanked: 13 times
Been thanked: 7 times
I'm considering adding one of these to my car as well.. https://www.delawareporscheparts.com/cart has them for $140 plus shipping.
1986 944 Turbo - Vitesse MAF (Stealth), Evergreen K27/8 Raptor, Kroon, Ftech9, KW V3, etc.
2005 911 Carrera S Launch Edition

#6

Top
Post Reply