- IMG_0622.jpeg (2.75 MiB) Viewed 20 times
- IMG_0621.jpeg (2.64 MiB) Viewed 20 times
- IMG_0620.jpeg (2.62 MiB) Viewed 20 times
- IMG_0619.jpeg (3.21 MiB) Viewed 20 times
- IMG_0613.jpeg (3.38 MiB) Viewed 20 times
Alternator option Ford 3g
Just wanted to share my alternator option. I had a Nissan Quest unit, but it was drawing .5 to .7 amps, so it needed to go. I saw a thread from a 928 group about using the Ford Contour unit. This was a very easy conversion. Only the mounting ears needed very little material removed from the back side, and if you use 8mm or 5/16 mounting bolts, it goes right onto the stock mount with no modifications. The alternator I bought was from a 95 Ford Contour 4cyl, it had the correct pulley, and uses the stock belt. The regulator needs to be changed to 97 F150 or equivalent. I am about 200 miles in on this, and it’s working great.
-
Tom
- Site Admin
- Posts: 9101
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 952 times
- Been thanked: 4086 times
- Contact:
Welcome to Carpokes and great post! I have the Nissan alternator and it's been working great for years (after finally finding a quality rebuild), but I've always thought there must be other alternators that are a closer fit without all the extensive grinding needed for the Nissan one.