Page 1 of 1
944 Windshield Wiper Nut Cap
Posted: Mon Jul 11, 2022 7:28 pm
by Tom
Here is my version of the late 944 Windshield Wiper Nut Cap, which attempts to be as true to the original as possible.... The picture shows it printed in a high-resolution resin, but it does pretty well on a standard FDM printer in ABS.
Reminder, you need to be registered with at least 1 post to download the .stl file.
944 Windshield Wiper Cap.stl
wiper cad 4.jpg
Re: 944 Windshield Wiper Nut Cap
Posted: Tue Jul 12, 2022 7:08 am
by 4mangoes
Can send me that file to3 D print the cap?
Thank you
Re: 944 Windshield Wiper Nut Cap
Posted: Tue Jul 12, 2022 7:17 am
by Tom
4mangoes wrote: Tue Jul 12, 2022 7:08 am
Can send me that file to3 D print the cap?
Thank you
Send you? You can download it in the first post of this thread....?
Re: 944 Windshield Wiper Nut Cap
Posted: Wed Jul 13, 2022 6:35 am
by OleJake
Excellent, thank you! I’ve always felt the wipers looked unfinished!!
Re: 944 Windshield Wiper Nut Cap
Posted: Wed Jul 13, 2022 2:47 pm
by thibaume
thank you for this....have to find a printer now !
Re: 944 Windshield Wiper Nut Cap
Posted: Sun Oct 02, 2022 3:16 am
by CFinlayson
Has anyone printed one of these yet?
Re: 944 Windshield Wiper Nut Cap
Posted: Sun Jan 08, 2023 3:10 pm
by Zirconocene
Hi Tom-
I made a small addition to the .stl file that you provided. I'm still pretty new at this but can you run a sanity check on whether there are major issues with the design I've produced? I added the embossing via Tinkercad and I don't have any idea if it's messing with the original file in a way that might break the print.
At any rate, if you can check it out, I'll give it a shot on my printer.
Cheers