Page 1 of 1
Ref sensor ID
Posted: Tue Jun 03, 2025 10:06 am
by seiplej
If you looked at this what one would you guess is the ref sensor and speed sensor?
Re: Ref sensor ID
Posted: Tue Jun 03, 2025 10:22 am
by Tom
Red for reference?? You can ohm out the connectors to the main DME 35-pin connector to know for sure. Speed is on 27 and Ref on 26.
Re: Ref sensor ID
Posted: Tue Jun 03, 2025 2:04 pm
by gb951
If you look at the sensor when mounted, the one towards the rear of the engine is the speed sensor and the one towards the front of the engine is the TDC sensor.
Of course, if you have then reversed, the car will not start. Switch the connections and try again. (A prudent course after any job disturbing the sensors.)