A grassroots Porsche technical community
https://carpokes.com/
That sounds like a recipe for massive mid range through minimal torque lag and should flow just enough for whatever an 8V head with the 9R cam can offer with the stock inlet and IC. You don't mention the exhaust but I'm sure you will use nothing smaller than 3".SirLapsalot wrote: Thu Mar 06, 2025 9:59 amWhat do you guys think about the G30-660 with 0.83 A/R for an 8V 3.0L running 1-1.3 bar of boost?
chris white wrote: Fri Mar 07, 2025 7:14 am he is a map for the Tial set up i use for 3.0 street
figuring a 1.5 bar of boost at 6500prm you will be in the 83% efficiency range.
At 1 bar, 3500 you are down to 82% efficiency.
So its got you covered at both ends of the performance range.
it is impressive, teamed up with a stainless center section with replaceable mounting base and the great Tial SS hotside I think its a winner.gruhsy wrote: Fri Mar 07, 2025 8:53 am That’s a really efficient compressor map.
First I have seen in the 80%.
I may just have to add one from you to one of my builds.
That of course will have to go with your cam time machine piece you made and I will guess a Link of some configuration.
Still going to do a twin scroll but that the plus side of having so many engine blocks now.
If you offered that with a Vband crossover and downpipe package you'd have my attention.chris white wrote: Fri Mar 07, 2025 2:37 pm
it is impressive, teamed up with a stainless center section with replaceable mounting base and the great Tial SS hotside I think its a winner.
just might be something I am working on......Bergerac wrote: Sat Mar 08, 2025 9:11 pmIf you offered that with a Vband crossover and downpipe package you'd have my attention.chris white wrote: Fri Mar 07, 2025 2:37 pm
it is impressive, teamed up with a stainless center section with replaceable mounting base and the great Tial SS hotside I think its a winner.
I sent you a PM Chris, not sure if theres a better way to get in touchchris white wrote: Sun Mar 09, 2025 8:17 amjust might be something I am working on......Bergerac wrote: Sat Mar 08, 2025 9:11 pmIf you offered that with a Vband crossover and downpipe package you'd have my attention.chris white wrote: Fri Mar 07, 2025 2:37 pm
it is impressive, teamed up with a stainless center section with replaceable mounting base and the great Tial SS hotside I think its a winner.
Paging @chris white... You can also reach him through his website I'm sure.Bergerac wrote: Thu Mar 13, 2025 8:47 pmI sent you a PM Chris, not sure if theres a better way to get in touchchris white wrote: Sun Mar 09, 2025 8:17 amjust might be something I am working on......Bergerac wrote: Sat Mar 08, 2025 9:11 pm
If you offered that with a Vband crossover and downpipe package you'd have my attention.