Carpokes Porsche Forum

TE has a 5 or 7 position connector and I assume boot/strain relief still in the catalog. One of those might fit since they don't show a 6 pos anymore.

AudiSport wrote: Wed Aug 10, 2022 12:24 pm TE has a 5 or 7 position connector and I assume boot/strain relief still in the catalog. One of those might fit since they don't show a 6 pos anymore.

I'm wondering it mine was the 5 pin version, and if that's why it split open for no particular reason. Good idea though -- maybe i'll get one of each, assuming I can find them, and report back if one of them fits.

Only 6 pin I found was the recommended one from 944online.

I see 3D print in your future Tom

I should order one along with my main bearings and woodruff keys from 944Online.

I could get Fidelity Machine and Mold to copy it and make a 1000 of them.

https://www.fidelitymanufacturinggroup.com/


Good excuse for me to stop by the new Facility they just built.


.

A little expensive, but this is where I found and bought some of the higher pin count boots for the harness I made (no affiliation): https://www.milspecwiring.com/Boots_c_445.html

Cheers