Page 2 of 2
Re: Auxiliary air regulator cleaning
Posted: Thu Oct 03, 2024 6:46 am
by JamesM
Cheers,
I've got it out now and like you want to change all the seals. I've found the dimensions of 3 but cant find the size of the one at the top of the oil catcher (the one you have to pries the top of to get at)
Does anyone have the dimensions for this "O" ring to hand please?
Regards Rob
https://www.mcmaster.com/9396K172/
This is what I got and did mine recently and it held up with no smoke leakage, NC944er has a video on the aos seals that's what I referenced to buy mine. I used assembly lube on all the orings when installing then to make sure they didnt get caught and deform on anything
Re: Auxiliary air regulator cleaning
Posted: Thu Oct 03, 2024 5:04 pm
by Redmonds944
JamesM wrote: Thu Oct 03, 2024 6:46 am
Cheers,
I've got it out now and like you want to change all the seals. I've found the dimensions of 3 but cant find the size of the one at the top of the oil catcher (the one you have to pries the top of to get at)
Does anyone have the dimensions for this "O" ring to hand please?
Regards Rob
https://www.mcmaster.com/9396K172/
This is what I got and did mine recently and it held up with no smoke leakage, NC944er has a video on the aos seals that's what I referenced to buy mine. I used assembly lube on all the orings when installing then to make sure they didnt get caught and deform on anything
I measured and ordered 76x2.5mm which I think measures the same.