Hayward released a 16V manifold about a year ago. I'm not sure how many plenums he cast in that run but I would get in quick because it was a 6month wait for a casting run.Jotronic wrote: ↑Sat Oct 26, 2024 8:25 pmNot sure if I'm missing something but that Hayward intake is on your 16v head. I thought they made these only for 8v heads. Please clarify.Bergerac wrote: ↑Fri Jun 14, 2024 5:39 am Things have slowed down a bit, I'm back to working out in the desert so I'm away for 2 weeks at a time ATM PXL_20240601_061324081.jpg
Ive finalised the plumbing in the engine bay to get the S2 engine running again. I had to clock the AOS outlet 60deg to clear the intake manifold.
PXL_20240611_011805996.jpg
Fuel lines are finished, I need to reinstate the pump, flush the lines and set the base pressure.
PXL_20240610_044004820.jpg
New motor is far as it can go until I can take parts off the S2 motor to complete it. I'm still tossing up what to do with the headers and cross over but the focus is on getting the car running and non-boost tuning done.
PXL_20240522_050917937.jpg
944S2 16V Turbo Build
-
- Posts: 10
- Joined: Sun Mar 17, 2024 11:53 pm
- Has thanked: 4 times
Well if someone wants an intake, best get in touch with Sebastian or me than so you dont get a cast one but a CNC one for about the same priceBergerac wrote: ↑Sat Oct 26, 2024 9:18 pmHayward released a 16V manifold about a year ago. I'm not sure how many plenums he cast in that run but I would get in quick because it was a 6month wait for a casting run.Jotronic wrote: ↑Sat Oct 26, 2024 8:25 pmNot sure if I'm missing something but that Hayward intake is on your 16v head. I thought they made these only for 8v heads. Please clarify.Bergerac wrote: ↑Fri Jun 14, 2024 5:39 am Things have slowed down a bit, I'm back to working out in the desert so I'm away for 2 weeks at a time ATM PXL_20240601_061324081.jpg
Ive finalised the plumbing in the engine bay to get the S2 engine running again. I had to clock the AOS outlet 60deg to clear the intake manifold.
PXL_20240611_011805996.jpg
Fuel lines are finished, I need to reinstate the pump, flush the lines and set the base pressure.
PXL_20240610_044004820.jpg
New motor is far as it can go until I can take parts off the S2 motor to complete it. I'm still tossing up what to do with the headers and cross over but the focus is on getting the car running and non-boost tuning done.
PXL_20240522_050917937.jpg

Bas are you guys doing them all with a carbon plenum or are you mainly just selling the runners and flanges?BasHenneman wrote: ↑Sat Oct 26, 2024 10:55 pm
Well if someone wants an intake, best get in touch with Sebastian or me than so you dont get a cast one but a CNC one for about the same price![]()
-
- Posts: 10
- Joined: Sun Mar 17, 2024 11:53 pm
- Has thanked: 4 times
We’re now doing the first test and then making an Aluminum plenum so we can make the full intake.Bergerac wrote: ↑Sun Oct 27, 2024 1:51 amBasHenneman wrote: ↑Sat Oct 26, 2024 10:55 pm
Well if someone wants an intake, best get in touch with Sebastian or me than so you dont get a cast one but a CNC one for about the same price![]()
Bas are you guys doing them all with a carbon plenum or are you mainly just selling the runners and flanges?
@BasHenneman - please share details and photos of your intake.BasHenneman wrote: ↑Sat Oct 26, 2024 10:55 pmWell if someone wants an intake, best get in touch with Sebastian or me than so you dont get a cast one but a CNC one for about the same price![]()
Boston-area, MA
Is the Hayward intake the reason for the amazing sound? I’m considering his intake for the 968
Boston-area, MA
The car had a cargraphic exhaust already which was quite raspy and nice but the combo of the manifold and cone filter I put on maybe it quite throaty and raw. The turbo will probably mute most of the intake sound I guess. I'm hoping the fabspeed exhaust sounds just as good
-
- Posts: 10
- Joined: Sun Mar 17, 2024 11:53 pm
- Has thanked: 4 times
Attached some quick pictures.
First one will be finished in the next weeks!
First one will be finished in the next weeks!
- Attachments
-
- 1f47261f-05dc-4e29-8b86-a6a07cea32a8.jpeg (214.18 KiB) Viewed 497 times
-
- e4ffa868-2a49-4cec-af6b-dffb29804450.jpeg (1.67 MiB) Viewed 497 times
-
- 67f2b047-c299-473e-8cc4-7d0e272daad5.jpeg (1016.68 KiB) Viewed 497 times
-
- da5f5256-25ad-460e-8eee-77bb54109673.jpeg (1.45 MiB) Viewed 497 times
-
- cd5bf73b-226f-49e9-a3a9-ae006ceda3a9.jpeg (237.7 KiB) Viewed 497 times
Very nice! That will fit with the brake booster in place? Will it work with a naturally aspirated 3.Ol motor? Please post more details when you have it done. I’d be interested in the weight too, because my 968 intake weighs a ton. Thanks.BasHenneman wrote: ↑Sun Oct 27, 2024 10:50 pm Attached some quick pictures.
First one will be finished in the next weeks!
Boston-area, MA
-
- Posts: 10
- Joined: Sun Mar 17, 2024 11:53 pm
- Has thanked: 4 times
You will need to have a AOS relocate kit, but apart from that it will work.cp99 wrote: ↑Tue Oct 29, 2024 5:43 amVery nice! That will fit with the brake booster in place? Will it work with a naturally aspirated 3.Ol motor? Please post more details when you have it done. I’d be interested in the weight too, because my 968 intake weighs a ton. Thanks.BasHenneman wrote: ↑Sun Oct 27, 2024 10:50 pm Attached some quick pictures.
First one will be finished in the next weeks!
We can also make changes if you need us to!
Send me an email:
info@triplesky.nl