Ciao! It seems like this tool is becoming popular.
It goes straight to the printer!
thanks!
New 3D-Printed 944 Timing Belt Tensioner Tool
-
thurstonpowers3
- Posts: 2
- Joined: Tue Aug 20, 2024 12:04 pm
Good day! Did I miss the file to download to print this out? Looking to do a belt soon. Thank you!
-
blueline
- Moderator
- Posts: 4123
- Joined: Mon Sep 26, 2022 12:22 pm
- Location: Middle Tennessee
- Has thanked: 2758 times
- Been thanked: 1405 times
See the first post in this thread. Files are there.thurstonpowers3 wrote: ↑Tue Aug 20, 2024 12:07 pm Good day! Did I miss the file to download to print this out? Looking to do a belt soon. Thank you!
Tim
'24 Cayenne S - Algarve Blue Metallic
'22 992 Turbo S - Carmine Red
'21 718 Cayman GT4 - White
'21 718 Cayman GTS - black
'11 GMC 1500 Quad Cab 4x4 - black
Musik-Stadt Region
'24 Cayenne S - Algarve Blue Metallic
'22 992 Turbo S - Carmine Red
'21 718 Cayman GT4 - White
'21 718 Cayman GTS - black
'11 GMC 1500 Quad Cab 4x4 - black
Musik-Stadt Region
-
1983944Jrun
- Posts: 1
- Joined: Fri Aug 23, 2024 7:31 am
About to do my first belt change and looking forward to using this tool. Very cool.
-
Blknblumark
- Posts: 1
- Joined: Wed Sep 04, 2024 7:48 pm
Excited to try this out, don't think I am getting the right results with the other tool I have.
-
Tom
- Site Admin
- Posts: 5675
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 538 times
- Been thanked: 2497 times
- Contact:
Welcome aboard! Which other tool did you use?Blknblumark wrote: ↑Wed Sep 04, 2024 7:54 pm Excited to try this out, don't think I am getting the right results with the other tool I have.
-
Poorsche44
- Posts: 1
- Joined: Sat Sep 07, 2024 9:23 pm
Commenting so I can download, thanks!Tom wrote: ↑Tue Jul 19, 2022 6:32 pm I've been getting feedback about this model wanting to warp, and have struggled with that myself when using the NylonX. So, I offer up the same model, but with a built-in power brim, complete with little re-bars to help stop any of the brim from pulling away from the bed near the tool itself. Print this file as-is without any brim or raft (just a one-line skirt if you need to pick something). For me, this has been very effective at preventing the tool itself from warping, even with the NylonX.
Carpokes 944 Tensioner with Power Brim.stl
carpokes tensioer with brim.jpg