Spacers for Manholes

[Zirconocene]

After going back to a set of manholes that I picked up a while ago, I was informed that I should put on some spacers similar to the original parts. I used H&R 21mm parts. Here is that story, in pictures.

The included nuts

20240607_090331.jpg (3.73 MiB) Viewed 746 times

Conical seats for the included nuts

20240607_090344.jpg (3.73 MiB) Viewed 746 times

There was a lot of tire back there

20240607_081855.jpg (3.26 MiB) Viewed 746 times

On these wheels, there is plenty of space to handle the protrusion of the original wheel studs

20240607_082719.jpg (3.47 MiB) Viewed 746 times

Rears without spacers

20240527_170933.jpg (3.81 MiB) Viewed 746 times

Rears with spacers

20240527_170605.jpg (3.29 MiB) Viewed 746 times

Starting place, OZ Alleggeritas from a 99X

20240527_180114.jpg (3.18 MiB) Viewed 746 times

The original studs protrude, but no worries

20240607_083239.jpg (3.35 MiB) Viewed 746 times

I took the car for a drive and, so far, so good.

Cheers

[Smsarchitects]

Spacers added to rear only?

[Zirconocene]

Indeed, rears only.