Here is an STL for the white clip that holds the oxygen sensor to the back of the intake on the 944.
Factory part number is 999.651.224.40
This is printed in ABS with support. Printing it standing upright will increase the strength of the tangs, but either way the tangs are strong enough and stronger than most old/brittle clips. This is virtually identical to the original (what's left of mine shown for comparison), including the tab on the back that clips into the metal bracket on the back of the intake.
944 Oxygen Sensor White Harness Clip
- Tom
- Site Admin
- Posts: 5296
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 496 times
- Been thanked: 2335 times
- Contact:
You need at least one post on Carpokes to see and download files.
- Tom
- Site Admin
- Posts: 5296
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 496 times
- Been thanked: 2335 times
- Contact:
Nice to see you here on Carpokes. I've been watching your progress on facebook. Welcome. I'm duty-bound to remind everyone that all STL models are for non-commercial use per the site license, but if you want to use one in your business, please reach out to me at admin@carpokes.com. Not looking for money for something like this, but would love it if you returned the favor with a shout out or two for Carpokes on your social media feeds.
Support the cause and all....
-
- Posts: 4
- Joined: Thu Jul 08, 2021 11:57 am
- Has thanked: 4 times
- Been thanked: 3 times
Great file !